Thermopanel Wetroom Shower Trays are split in half for easier transport and movability. There are some instances where getting our shower trays through challenging hallways or tight spaces becomes a problem, and this is where our new split trays come in. Being split down the middle allows you to get these trays into the required location with ease. Please ensure the middle of the tray is sealed when installing.

Thermopanel Shower Former Trays have been designed for wet rooms and walk in showers, providing a tileable shower base, avoiding the need for the traditional 'step-in' white acrylic tray.

Thermopanel Mokra20 Wetroom Formers allow for total flexibility and give the installer the option of building their own wetroom system. It is a lightweight flush floor panel with pre-made falls to drain, and is coated with a cementitious layer ready to receive a tiled surface.

FREE Next Working Day Delivery if Ordered by 1pm (Terms & Conditions apply) | Price Match Guarantee (Full Details)

Key Features:

• 30mm depth.
• Offset Drain Position.
• Pre-made fall to drain.
• Lightweight & Strong.
• Under-boarding of Thermpanel required to provide support.
• Fully trimable by up to 50mm off each edge (equal amounts must be trimmed from each side).
• Ideal for creating flush 'walk in' showering areas (rest of floor will require boarding by 10mm).
• Easy & quick to install.
• Lifetime guarantee if fitted in accordance with manufacturer’s instructions.
• FREE next working day delivery if ordered by 2pm (Terms & Conditions apply).
• Price match guarantee (Full Details).
• Can be used on Wood or Concrete Floors.
• Lifetime Warranty.
• Suitable for Mosaics, Ceramic, Porcelain, Natural Stone.
• Suitable for Electric Underfloor Heating.

If you have a concrete floor or if there is no access under the flooring to locate the shower drain, then the tray can still be used by using a separate raised substrate.

Shower Drain/Waste:

Pipe Diameter: 50mm (inc 50mm to 40mm reducer)
Grate: 137mm x 137mm
Grate Holder: 148mm x 148mm
Depth: 75mm

Tanking Kit (If Selected)

To create a successful wet room or walk-in shower requires sound preparation and waterproofing of the floor and walls that will come into contact with the water. This is achieved by using our tanking kits.

Included in the Kit:

• 4kg or 8kg (Large Tanking Kit) of Membrane Paint
• Acrylic Primer
• 10 metres waterproof tape
• Internal corner
• Silicone 
• Brush,
• Gloves 
• Full instructions